e-licktronic Forum

Hello all,

I have a quick question regarding the polarized capacitors 10uF / 16V (according to parts list). The parts list states 16V but what I got with the Mouser BOM was 50V (Lelon Aluminum Electrolytic Capacitors - Leaded 50V 10uF 20%) and no 16V at all.

Is that a problem or can I use the 50V instead of the 16V?

Cheers,
Val

Second quick question: For the .1uF Film capacitors, i got the choice between 100V or 63V ones (both 5%). Which should I take?

Thanks,
Val

Higher Volt values are OK.

Alright thanks!