Page 1 of 1

[SOLVED] Voltage Problem: -15V pins are only at -5V

Posted: Nov 22nd, '19, 14:08
by Iggy
Hey fellow builders! Today I ran in a serious problem (at least I think so) after finishing the ride/crash section. When I plug in the PSU cable and check the voltage control points, I measure about 5V at the ICs and about +15V at the square marked pins of the op amps. So far, so good - but at the round control points of the op amps, where I should measure -15V, I only get about -5V, everywhere on the whole board :cry: What is wrong here?? How do I debug this and identify whats draining that power from there, lowering the voltage so much? The only thing I can think of is a shorty somewhere, working as a voltage divider, but I've got absolutely no idea on how to identify this. I already rechecked the PSU, but if not plugged in, it works as expected and outputs the adequate voltages.

I feel like I didn't make any mistake, like I doublechecked every component for the right polarity on the way, and didn't solder above 290°C anywhere, not staying on any solder joint for longer than a few seconds ... but still, this seems to be broken.

UPDATE:
So far I've changed the 7915 Voltage Regulator on the PSU for a fresh replacement with even better specifications (should hold until 1.5A), wrong voltage stays. Since it must be a short than, I'll have to find it. But how do I do that? I've got absolutely no experience in the field :( The only reasonable solution I came up with is thermal imaging the board- but after I googled for IR cams, I hat to discover that suitable imagers cost a shitload of money. Any suggestions how to approach my problem with limited resources? And could somebody provide me with an 1.02 BRD-File? I just find the 1.0 available for Download ...

Posted: Feb 2nd, '20, 13:39
by Iggy
I finally got to the bottom of this problem: After I could afford an IR cam, the problem became evident as you can see (the BA6110 seems shorted). I recommend everyone who seriously suspects their build having a short circuit to do the same and IR image their boards if there are no visible traces of overheating. @Klanggenerator advised me to float pin 3 as recommended here. I'll update here when I've managed to do so.

[Update]
After I finally managed to unsolder the BA6110, I put in a socket and a replacement for the IC. Now, Voltage is perfectly normal the way it should be. Problem solved!
Image

Re: [SOLVED] Voltage Problem: -15V pins are only at -5V

Posted: Jan 9th, '26, 10:04
by Rosy desk
This resource provides helpful information for users who want a smooth login experience. It explains common steps involved in Syw.accountonline.com login and highlights how users can safely access their accounts while protecting sensitive personal data.
The guide walks users through the complete process of accessing their account online. By following the instructions for Syw.accountonline.com login, cardholders can avoid errors and quickly reach their dashboard to manage payments and account settings.
This content focuses on simplifying payment management for Shop Your Way cardholders. After using Syw.accountonline.com login, users can schedule payments, review past transactions, and ensure bills are paid on time without complications.
The presentation offers a clear overview of how to securely access and use the online account system. It explains how Syw.accountonline.com login works and why it is important for maintaining control over credit card activity.
This help hub serves as a central place for resolving account-related questions. Users who complete Syw.accountonline.com login can find assistance with login issues, payment concerns, and account updates in one convenient location.

Re: [SOLVED] Voltage Problem: -15V pins are only at -5V

Posted: Jan 9th, '26, 10:11
by Rosy desk
This resource explains common login errors and practical fixes. Users struggling with Syw.accountonline.com login can follow simple solutions to regain access.
It provides clear instructions for using the mobile app effectively. After Syw.accountonline.com login, users can manage accounts conveniently from their phones.
This page explains how to reset account PINs safely. It ensures that Syw.accountonline.com login remains protected from unauthorized access.
It guides users on accessing rewards accounts online. With Syw.accountonline.com login, users can track points and rewards without hassle.
This content focuses on managing credit card features online. After Syw.accountonline.com login, users can review balances, statements, and payment options easily.

Re: [SOLVED] Voltage Problem: -15V pins are only at -5V

Posted: Jan 9th, '26, 10:32
by Rosy desk
It explains how to update mailing addresses online.Syw.accountonline.com login ensures personal details remain current.
This guide hub offers clear account usage instructions. Users benefit from Syw.accountonline.com login by understanding features better.
It explains how to check credit card balances online. Syw.accountonline.com login provides real-time balance updates.
This article guides users through card activation. After activation,Syw.accountonline.com login login gives full account access.
It provides technical documentation for card services.Syw.accountonline.com login remains central to managing all features.

Re: [SOLVED] Voltage Problem: -15V pins are only at -5V

Posted: Jan 9th, '26, 10:41
by Rosy desk
This platform serves as a complete help guide for users who want clear and reliable information about managing their Shop Your Way credit card account online. It explains how the online system works, what features are available, and how users can safely handle their account details. By using Syw.accountonline.com login, cardholders can access essential tools such as balance checks, payment options, and account updates, all from one secure place.
This guide focuses on explaining the overall login process in a simple and easy-to-understand way. It helps users learn how the system functions behind the scenes and what is required to access their account successfully. With the help ofSyw.accountonline.com login, users can confidently enter the portal, understand security steps, and make the most of the online account features without confusion.
This resource is designed for users who want step-by-step instructions for accessing their account online. It clearly explains each stage of the login process, including entering credentials and resolving common access issues. By following the guidance provided and completing Syw.accountonline.com login correctly, users can quickly reach their dashboard and manage payments, statements, and personal information without unnecessary delays.
This resource is designed for users who want step-by-step instructions for accessing their SYW account online. It clearly explains each stage of the login process, including entering credentials and resolving common access issues. By following the guidance provided and completing the Syw.accountonline.com login correctly, users can quickly reach their dashboard to manage payments, statements, and personal account information with ease.

Re: [SOLVED] Voltage Problem: -15V pins are only at -5V

Posted: Jan 9th, '26, 10:47
by Rosy desk
This help hub acts as a central location for all card-related assistance. It includes activation help, usage guides, and troubleshooting tips, all pointing users to Activate.uhc.comas the starting point.
This resource explains the exact steps needed to activate the healthcare card successfully. It highlights common mistakes to avoid and confirms that Activate.uhc.com is the correct website to complete activation.
This guide walks users through setting up their online account after card activation. Once users finish the process atActivate.uhc.com, they can log in to manage benefits, claims, and personal information
This portal offers structured help for members who prefer simple navigation and clear instructions. It ensures users understand how Activate.uhc.com fits into the overall process of managing their healthcare benefits.
This page focuses entirely on card activation and explains what information is required. It reassures users that Activate.uhc.com is secure and designed for quick completion.

Re: [SOLVED] Voltage Problem: -15V pins are only at -5V

Posted: Jan 9th, '26, 10:57
by Rosy desk
This resource explains how to set up a Prime Video account PIN using a web browser. Once the device is activated through amazon.com/code., users can manage additional security settings online.
This document explains where Fire TV Stick users should enter their registration code. It confirms that amazon.com/code. is required to link the device and begin streaming.
This guide provides clear instructions for entering an activation code to register any compatible device. It reinforces that amazon.com/code. is the trusted page for completing the setup process.

Re: [SOLVED] Voltage Problem: -15V pins are only at -5V

Posted: Jan 9th, '26, 11:02
by Rosy desk
This guide hub offers clear and friendly help for users who need to access their Canopy Tax account. It covers important information about how the login system works and helps users understand what to expect when signing in. By understanding the Canopy tax login process, taxpayers and professionals can securely manage tax returns, view documents, and handle account settings with confidence.
This installation guide explains how to set up the Canopy Tax software or app before attempting to log in. It walks users through downloading, installing, and preparing the platform so that accessing the account later through Canopy tax login is smooth and trouble-free.
This setup guide focuses on all the preliminary steps needed before using the online account tools. It clarifies profile creation, security setup, and device preferences so that when users reach the Canopy tax login screen, they already have everything ready for a fast and successful sign-in.
This troubleshooting guide helps users who encounter issues while signing into their Canopy Tax account. It explains common problems that may block access and gives practical solutions that users can follow to fix errors and complete the Canopy tax login process without frustration.
This help site provides comprehensive assistance for users who want to understand how the TaxSlayer login process works and how to access their tax account with ease. It explains the purpose of the login portal, what information is required, and how users can securely sign in to prepare or review their tax returns online.

Re: [SOLVED] Voltage Problem: -15V pins are only at -5V

Posted: Jan 9th, '26, 11:03
by Rosy desk
This guide hub offers clear and friendly help for users who need to access their Canopy Tax account. It covers important information about how the login system works and helps users understand what to expect when signing in. By understanding the Canopy tax login process, taxpayers and professionals can securely manage tax returns, view documents, and handle account settings with confidence.
This installation guide explains how to set up the Canopy Tax software or app before attempting to log in. It walks users through downloading, installing, and preparing the platform so that accessing the account later through Canopy tax login is smooth and trouble-free.
This setup guide focuses on all the preliminary steps needed before using the online account tools. It clarifies profile creation, security setup, and device preferences so that when users reach the Canopy tax login screen, they already have everything ready for a fast and successful sign-in.
This troubleshooting guide helps users who encounter issues while signing into their Canopy Tax account. It explains common problems that may block access and gives practical solutions that users can follow to fix errors and complete the Canopy tax login process without frustration.
This help site provides comprehensive assistance for users who want to understand how the TaxSlayer login process works and how to access their tax account with ease. It explains the purpose of the login portal, what information is required, and how users can securely sign in to prepare or review their tax returns online.