e-licktronic Forum

Hey, I am just soldering the sequencer and it seems that there are some parts missing in the BOM..
I need "9" of Multilayer ceramic capacitor (104), but there are only 5, but another 4 of capacitors with the description 100n 1j63v. It seems they will be without use then..
Can someone help me?!
kind regards
Philip

I assume those are 100nF caps, they should get around 3 or 5V so you can basically use whatever 100nF you find and solder it in.

If you wanna be 100% sure, post the schematic or at least the numbering of your missing caps, that it is easy to say if its right or wrong.

PS: 104 stands for 100nF = 10 * 10^4 = 10 * 10 000 = 100 000 pF = 100 nF to make it clear.