e-licktronic Forum

e-licktronic wrote: C48 is use as Power bypass capacitor so it doesn't matter that much (on the sound of the noise) if it is ceramic or film capacitor

OK. But shouldn't we still update the build guide?

Now there are only 7x 0.1uF film caps in the BOM. The build guide still says to put a film capacitor at C48. So by the time a new builder gets to the hand clap (C59, C61) they will have only one 0.1uF film capacitor left, and this will create confusion.

Annnnnnnd I have read this a day too late and indeed have 1 left when2 are required for hand clap

56nF in BOM marked as C39 is C25 on built it scheme

Mouser Bom updated ?? nothing is missing?? something i need to know

what about the 390pF styroflex capacitor??
THX

The LED mounts in the current BOM are still the incorrect size....too big...

We need potentiometers value in patr list like in Yocto projekt B104 = 100KB will be more easy and will avoid mistakes

(potentiometers value match the number on potentiometers -- Potentiometer (B104) VR8 100K(B) )

Hi there,
Currently completing parts purchase for mine, though I don't know much and will have it built by someone else.
A question to those more in the know : there's a ceramic capacitor in particular that is out of stock for a long time and I'm trying to find a suitable replacement.

This is the one not in stock (SR211C104KARTR1) :

http://www.mouser.fr/Search/ProductDeta ... C104KARTR1

Then below is one actually in stock that seems to be exactly the same though at least one letter in the part-number makes it different (SR211C104KAATR1):

http://www.mouser.fr/ProductDetail/AVX/ ... TeQQ%3d%3d

Could someone be so kind to confirm I could use this one instead or, if not, point me to another suitable equivalent, that would be in stock right now of course ?

Thanks in advance

BedroomMusic wrote:We need potentiometers value in patr list like in Yocto projekt B104 = 100KB will be more easy and will avoid mistakes

(potentiometers value match the number on potentiometers -- Potentiometer (B104) VR8 100K(B) )

find on forum

B1 03 - 10k B, lin
A1 05 - 1M A, log
B5 03 - 50k B, lin
A1 04 - 100k A, log
B5 04 - 500k B, lin
B1 04 - 100k B, lin
B5 01 - 500R B, lin

The build guide still says to put a film capacitor at C48 not the ceramic UPDATE PLS im on handclap an one 0.1 film left

Is C163 correct to the parts list in the build notes (.01uf) or as the picture shows (.47j100)?